Reshafting a Putter: How to Do It Right

Golf Equipment
1

Introduction

Reshafting a putter can significantly enhance your game by tailoring the club to fit your personal preferences. Whether you’re looking to replace a damaged shaft, adjust for changes in your grip, or simply experiment for better performance, this guide will walk you through the process of reshafting your putter with ease.

Tools and Materials Needed

Before you begin, it’s essential to gather all the necessary tools and materials:

  • New putter shaft: Choose one that fits your desired flex and weight.
  • Epoxy adhesive: For securing the shaft in place.
  • Putter grip: Optional, but often replaced when changing the shaft.
  • Heat source: A heat gun or hairdryer to loosen the glue.
  • Screwdriver: For removing the old grip if necessary.
  • Measuring tape: To ensure the correct length.

Steps to Reshaft Your Putter

  1. Remove the Old Shaft:

    • Apply heat to the hosel (where the shaft meets the putter head) to soften the existing epoxy.
    • Gently twist and pull the old shaft out. Be careful not to damage the hosel.

  2. Prepare the New Shaft:

    • Measure the desired length of your putter. Typically, putters range from 32 to 36 inches, but personal preference plays a significant role.
    • Cut the new shaft to the appropriate length, if necessary.

  3. Clean the Hosel:

    • Use a cloth or sandpaper to remove any leftover epoxy or debris to ensure a smooth fit.

  4. Install the New Shaft:

    • Mix the epoxy according to package instructions.
    • Apply a generous amount into the hosel, then insert the new shaft, twisting slightly for even coverage.
    • Make sure the shaft is aligned correctly; check that the face of the putter is square.

  5. Let it Cure:

    • Allow the epoxy to cure as per the manufacturer’s recommendations, generally between 6 to 24 hours.

  6. Re-grip the Putter:

    • If replacing the grip, remove the old grip using a screwdriver to pry it off.
    • Apply the new grip by sliding it onto the shaft with grip tape underneath for adhesion.

Tips for Success

  • Always take your time during each step for the best results.
  • Ensure you’re in a well-ventilated area, especially when using epoxy.
  • If you’re uncomfortable doing it yourself, consider seeking professional help at a local golf shop.

Conclusion

Reshafting your putter can breathe new life into your game and provide the custom feel you’ve been looking for. Whether you choose to DIY or go professional, knowing the ins and outs of the reshafting process is a valuable skill for any golfer. Happy putting!

2

Reshafting a putter can really improve your game! First, you’ll need a few tools: a heat gun, epoxy, a shaft cutter, and a vice. Don’t forget to measure the shaft length correctly before removing the old one!

3

Great tips! I would add that selecting the right shaft flex is crucial too, depending on your playing style.

8 Likes
4

Thanks for the step-by-step, Molly! After measuring the shaft length, do you just cut the new shaft to size, or should you measure it again after cutting?

2 Likes
5

Always double-check your measurements after cutting! It’s better to be cautious than to end up with a shaft that’s too short.

6

When you remove the old shaft, use a heat gun to loosen the epoxy. It makes things way easier! Just be careful not to damage the putter head.

4 Likes
7

I’m curious about the type of epoxy to use. Is there a certain brand or strength that works best for putters?

8

I usually go with a 24-hour epoxy for a solid bond. It takes a bit longer to cure, but it’s worth it for the durability.

9

A little humor: If things go wrong, just tell everyone it’s a new experimental design! :joy:

10

After applying epoxy, how long do we usually wait before trying out the putter? Just want to avoid any mishaps on the course!

11

It’s best to let the epoxy cure for at least 24 hours. Better safe than sorry!

12

What about checking the grip? I think that can affect putting as well. Would love some tips on that part!

13

Good point! Make sure the grip fits comfortably in your hands. A thick grip can help with consistency, especially if you have smaller hands!

3 Likes
14

I think it’s a must to follow the steps exactly. Skipping steps could lead to disaster - like ending up with a wobbly head!

8 Likes
15

I actually tried reshafting my old putter but got it all wrong. Who knew measuring twice was so important? :sweat_smile:

16

By the way, there’s some great videos online that visually demonstrate the process if anyone is a bit hesitant about doing it themselves!

2 Likes
17

That’s true! Sometimes seeing someone do it is way more effective than just reading about it.

18

When reshafting a putter, it’s crucial to consider the shaft type. Graphite vs. steel can really impact your feel and performance. How do you choose between them?

19

Absolutely! I’ve found that graphite offers a softer touch which can help with feel on the green, whereas steel tends to provide better feedback on your stroke.

20

That makes sense, marystewart! Has anyone tried varying the shaft length? I’ve read it can change your stance and thus your putting style significantly.